Quality machine embroidery designs for machine embroidery in ART DST EXP HUS JEF PCS PES VIP and XXX formats with freebies to download

Design Index
E-mail us
Information Page
Contact us
Designsbypetro at Yahoo

Image of flower.jpg

Machine embroidery projects page 10
Here you will find photos of projects, projects and instructions of embroidered items done by Petro and our customers.  Please mail us if you would like us to add your project here.

: Projects index page : page 1 : page 2 : page 3 : page 4 : page 5 : page 6 : page 7 : page 8 : page 9 : page 10 : page 11 : page 12 : page 13 : page 14 : page 15 :

Free standing Lavender embroidery designs.

Image of lavendertray1.jpg

Free standing Lavender embroidery design 1.jpg
Free standing Lavender embroidery design 2.jpg
4x4: W 94.2mm x H 90.3mm
3 stops 2 colors 7928 stitches
5x7: W 26.2mm x 168.6mm
3 stops 2 colors 10593 stitches
4x4: W 94.8mm x H 90.9mm
3 stops 2 colors 9395 stitches
5x7: W 22.8mm x H 168.6mm
3 stops 2 colors 12436 stitches

This instructions are to be used for stitching the 2 free standing embroidery design files:

You will need:
1. Two layers of water suluble vilene Avlon plus. This is the white Avlon product that looks like tear away stabilizer but it will dissolve in water.
2. Embroidery thread.
3. Bobbins that has been wound with the same embroidery thread as what you intend using for your top thread.
4. Bowl of warm water.


1.  Stitch design on two layers of water soluble vilene.
2.  Cut most of the vilene away leaving about 2-3mm aroung the edges of your flower.
3.  Now roughly cut two pieces of vilene the same shape as your flower. Place one piece on top of design and one piece underneath the design and hold it in place with your fingers as you dip the design in the bowl of warm water .  (This step is neccessary to make your flower more rigid to help it to stay upright when placed in a container).
4.  Dissolve in warm water for just a few seconds until vilene is dissolved.
5.  Lay design down on a flat surface to dry completely before ironing.  A towel works well.
6.  Set your iron on medium heat and lightly press down on the dried out flower design. This will cause the remaining Avlon plus to crystalise keep your design stiff.
It is important to dip your design for just a few seconds during step 4 so that some of the Avlon plus remains.

Image of flower.jpg

All of the designs on designsbypetro.com are copyrighted. You may use these designs for your personal embroidered items, embroidered items to sell, and embroidered items to give as gifts. The rights to the designs themselves remain with designsbypetro.com. You may not transfer, share, or sell the actual design files without written permission from designsbypetro.com.

Image of flower.jpg

Subscribe to designsbypetro
Powered by groups.yahoo.com


Image of saflag75.jpg